Contact : +33 1 41 23 50 23 (9:00 – 17:00 CEST)
Type 1+2+3 AC surge protector - 3-phase+N
ZPAC1-8VG-31-275
Part Number 64006
- Type 1+2+3 AC Surge protection
- VG Technology
- For 40 mm busbar systems
- Iimp 8 kA (10/350 μs)
- Reduces energy costs: Does not produce flow current and leakage current
- Certified IEC 61643-11 and EN 61643-11
Datasheet
Select another reference:
|
SPD type
|
IEC | 1+2+3 |
|
Network
|
230/400 V 3-phase+N | |
|
AC system
|
TT-TNS | |
|
Nominal line voltage
|
Un | 230/400 Vac |
|
Max. AC operating voltage
|
Uc | 275 Vac |
|
Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
|
UT | 335 Vac withstand |
|
Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
|
UT | 440 Vac withstand |
|
Temporary Over Voltage N/PE (TOV HT)
Without disconnection or with safety disconnection
|
UT | 1200 V/300A/200 ms withstand |
|
Residual Current
Leakage current to Ground
|
Ipe | None |
|
Operating current
Continious current at Uc
|
Ic | None |
|
Follow current
|
If | None |
|
Nominal discharge current
15 x 8/20 µs impulses
|
In | 20 kA |
|
Max. discharge current
max. withstand @ 8/20 µs by pole
|
Imax | 50 kA |
|
Impulse current by pole
max. withstand 10/350µs by pole
|
Iimp | 8 kA |
|
Total lightning current
max. total withstand @ 10/350µs
|
Itotal | 32 kA |
|
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
|
Uoc | 6 kV |
|
Withstand on overvoltages IEEE C62.41.1
|
20 kV | |
|
Specific energy by pole
max. withstand 10/350 µs
|
W/R | 16 kJ/ohm |
|
Connection mode(s)
|
L/N and N/PE | |
|
Protection mode(s)
|
Common/Differential mode | |
|
Protection level L/N
@ In (8/20µs)
|
Up L/N | 1.5 kV |
|
Protection level L/PE
@ In (8/20µs)
|
Up L/PE | 1.5 kV |
|
Residual voltage L/N at 5 kA
@ 5 kA (8/20µs)
|
Up-5kA | 0.7 kV |
|
Admissible short-circuit current
|
Isccr | 50 000 A |
|
Technology
|
VG Technology (MOV+GSG) | |
|
SPD configuration
|
3-phase+Neutral | |
|
Connection to Network
|
By 40mm busbar and wire for PE: 6-35mm² (50mm²) | |
|
Format
|
Plug-in modular box | |
|
Mounting
|
40 mm busbar systems | |
|
Housing material
|
Thermoplastic UL94 V-0 | |
|
Operating temperature
|
Tu | -40/+85°C |
|
Protection rating
|
IP20 | |
|
Outdoor application
|
No | |
|
Failsafe mode
|
Disconnection from AC network | |
|
Disconnection indicator
|
1 mechanical indicator by pole | |
|
Spare module(s)
|
ZMDAC1-8VG-275 | |
|
Remote signaling of disconnection
|
none | |
|
Dimensions
|
See diagram | |
|
Weight
|
0.74 kg |
|
Standards compliance
|
IEC 61643-11 / EN 61643-11 / UL1449 5ed. | |
|
Certification
|
KEMA |
|
Thermal disconnector
|
Internal | |
|
Installation ground fault breaker
|
Type 'S' or delayed | |
|
Back-up protection device
|
max. 315 A (gL/gG) |
